Lantronix PremierWave XC PremierWave XC - Command Reference - Page 148
Does not send Modem Response Codes., network select manual operator:wwan0 level commands
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
5: Commands and Levels echo pluses disable Does not echo the +++ characters when entering modem command mode. echo pluses enable Echoes the +++ characters when entering modem command mode. error unknown commands disable Returns OK on unknown AT commands. error unknown commands enable Returns an error upon unknown AT commands. exit Returns to the tunnel level. incoming connection automatic Automatically answer incoming network connections. incoming connection disabled Disable incoming network connections. incoming connection manual Wait for an ATA command before answering an incoming network connection. no connect string Removes optional CONNECT string information for modem emulation. reassert Asserts tunnel modem status with current configured values. response type numeric Uses numeric type responses. response type text Uses text type responses. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show status Displays tunnel modem status. verbose response disable Does not send Modem Response Codes. verbose response enable Sends Modem Response Codes out on the Serial Line. write Stores the current configuration in permanent memory. network select manual (operator:wwan0) level commands clrscrn Clears the screen. exit Exits to the operator level. operator id No help available. show Displays system information. show history Displays the last 20 commands entered during the current CLI session. show network list Display the mode of the cellular network. write Stores the current configuration in permanent memory. packing (tunnel-packing:2) level commands clrscrn Clears the screen. default packing mode Sets to default packing mode, which is "Disable" default send character Removes the send character for packing mode. default threshold Restores the default threshold. default timeout Restores the default packing mode timeout. exit Returns to the tunnel level. no trailing character Removes the trailing character for packing mode. packing mode disable Disables packing. Data is sent to the network when received. packing mode send character Sets packing mode to accumulate data and transmit it upon receiving the configured send character on the line (serial port). packing mode timeout Sets packing mode to accumulate data and transmit it after a specified amount of time (timeout). send character Sets the send character for packing mode. The character may be input as text, control, decimal, or hex. PremierWave XC Command Reference 148