Lantronix PremierWave XC PremierWave XC - Command Reference - Page 53
Clears the APN, apn apn:wwan0 level commands, arp config-arp level commands
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
5: Commands and Levels start character Sets the accept mode start character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. tcp keep alive Enables TCP keep alive for accept mode tunneling and sets the timer. = timer value, in milliseconds. write Stores the current configuration in permanent memory. apn (apn:wwan0) level commands apn The full name is Access Point Name. APN decides the way to access the internet using the mobile phone network clrscrn Clears the screen. default dialup number The default dialin account phone number. dialup number The ISP dialin account phone number exit Exits to the cellular level. no apn Clears the APN no password Clears the password. no username Clears the username. password Some carriers require password authentication in addition to SIM authentication. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. username Some carriers require user name authentication in addition to SIM authentication. write Stores the current configuration in permanent memory. arp (config-arp) level commands add Adds an entry to the ARP table, mapping an IP address to a MAC address. = IP address to be mapped. = MAC address in colon-separated form. clrscrn Clears the screen. exit Exits to the configuration level. remove all Removes all entries from the ARP cache. remove ip Removes an entry from the ARP cache. = address of the entry being removed. show cache Displays the ARP cache table. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. backup power fail (config-events-backup_power_fail) level commands clear events clear system current all events. clear faults clear system current all faults. clrscrn Clears the screen. exit Exits to the event configuration level. relay output Changes to back up power fail relay output menu for configuration. send sms Change to SMS for io configuration send snmp Changes to snmp menu for io configuration PremierWave XC Command Reference 53