Lantronix PremierWave XC PremierWave XC - Command Reference - Page 158
terminal 2 config-terminal:2 level commands, Enters the con terminal level for the network.
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
5: Commands and Levels exit exit connect menu disable exit connect menu enable line login connect menu disable login connect menu enable no send break preview connect menu send break show show history terminal terminal network terminal type tunnel write terminal 2 (config-terminal:2) level commands break duration clrscrn default break duration default terminal type echo disable echo enable exit exit connect menu disable exit connect menu enable line. Exits to the configuration level. On the login connect menu, removes the menu item allowing the user to exit to the CLI. On the login connect menu, inserts the menu item allowing the user to exit to the CLI. Enters the line level. = number of the line (serial port) to be configured. Disables the login connect menu, so a user will get the CLI immediately after logging in. Enables the login connect menu, so a user will get the menu rather than the CLI immediately after logging in. Removes the configured send break character. Shows the layout of the connect menu with current settings. Sets the optional send break character. = the character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Enters the configure-terminal level. = number of the terminal line (serial port) to be configured. Enters the configure-terminal level for the network. Sets the terminal type. Enters the tunnel level. = number of the tunnel line (serial port) to be configured. Stores the current configuration in permanent memory. Sets how long a break should last when it is being sent to the line. = number of milliseconds. Clears the screen. Restores the break duration to the default value (500 ms). Sets the default terminal type, "UNKNOWN". Disables echoing of characters received on the line back to the line. Enables echoing of characters received on the line back to the line. Exits to the configuration level. On the login connect menu, removes the menu item allowing the user to exit to the CLI. On the login connect menu, inserts the menu item allowing the user to exit to the CLI. PremierWave XC Command Reference 158