Lantronix PremierWave XC PremierWave XC - Command Reference - Page 139

Restores the default Maximum Transmission Unit MTU size., Disables DHCP.

Get Lantronix PremierWave XC PDF manuals and user guides View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 139 highlights

secure credentials secure port secure protocols ssl3 disable secure protocols ssl3 enable secure protocols tls1.0 disable secure protocols tls1.0 enable secure protocols tls1.1 disable secure protocols tls1.1 enable show show auth show history show log show statistics state disable state enable write icmp (config-icmp) level commands clrscrn exit show show history state disable state enable write if 1 (config-if:eth0) level commands bootp disable bootp enable clrscrn default gateway default mtu dhcp client id dhcp disable dhcp enable domain exit hostname if ip address 5: Commands and Levels = port number. Selects the RSA/DSA certificates by name for the HTTP server. Sets the port number the HTTP server will use over SSL. = port number. Disables the protocol. Enables the protocol. Disables the protocol. Enables the protocol. Disables the protocol. Enables the protocol. Displays the current configuration. Displays the HTTP server authentication settings. Displays the last 20 commands entered during the current CLI session. Displays the HTTP server log. Displays the HTTP statistics. Disables the HTTP server. Enables the HTTP server. Stores the current configuration in permanent memory. Clears the screen. Exits to the configuration level. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Prevents ICMP packets from being sent or received. Allows ICMP packets to be sent and received. Stores the current configuration in permanent memory. Disables BOOTP. Enables BOOTP. Clears the screen. Sets the configurable gateway IP address to the default value. Restores the default Maximum Transmission Unit (MTU) size. Sets the DHCP client id. Disables DHCP. Enables DHCP. Sets the domain name. = name of the domain. Exits to the config level. Sets the host name. = name of the host. Changes to the interface configuration level. Sets the IP address and network mask. Formats accepted: 192.168.1.1 (default mask) 192.168.1.1/24 (CIDR) "192.168.1.1 255.255.255.0" (explicit mask) PremierWave XC Command Reference 139

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
5: Commands and Levels
PremierWave XC Command Reference
139
<number> = port number.
secure credentials
<text>
Selects the RSA/DSA certificates by name for the HTTP server.
secure port
<number>
Sets the port number the HTTP server will use over SSL.
<number> = port number.
secure protocols ssl3 disable
Disables the protocol.
secure protocols ssl3 enable
Enables the protocol.
secure protocols tls1.0 disable
Disables the protocol.
secure protocols tls1.0 enable
Enables the protocol.
secure protocols tls1.1 disable
Disables the protocol.
secure protocols tls1.1 enable
Enables the protocol.
show
Displays the current configuration.
show auth
Displays the HTTP server authentication settings.
show history
Displays the last 20 commands entered during the current CLI
session.
show log
Displays the HTTP server log.
show statistics
Displays the HTTP statistics.
state disable
Disables the HTTP server.
state enable
Enables the HTTP server.
write
Stores the current configuration in permanent memory.
icmp (config-icmp) level commands
clrscrn
Clears the screen.
exit
Exits to the configuration level.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
state disable
Prevents ICMP packets from being sent or received.
state enable
Allows ICMP packets to be sent and received.
write
Stores the current configuration in permanent memory.
if 1 (config-if:eth0) level commands
bootp disable
Disables BOOTP.
bootp enable
Enables BOOTP.
clrscrn
Clears the screen.
default gateway
<IP address>
Sets the configurable gateway IP address to the default value.
default mtu
Restores the default Maximum Transmission Unit (MTU) size.
dhcp client id
<text>
Sets the DHCP client id.
dhcp disable
Disables DHCP.
dhcp enable
Enables DHCP.
domain
<text>
Sets the domain name.
<text> = name of the domain.
exit
Exits to the config level.
hostname
<text>
Sets the host name.
<text> = name of the host.
if
<instance>
Changes to the interface configuration level.
ip address
<ip address/cidr>
Sets the IP address and network mask.
Formats accepted:
192.168.1.1 (default mask)
192.168.1.1/24 (CIDR)
"192.168.1.1 255.255.255.0" (explicit mask)