Lenovo E200 Hardware Maintenance Manual (HMM) - 3000 E200 (type 7848) - Page 107

protective

Get Lenovo E200 PDF manuals and user guides View all Lenovo E200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

8. Remove the protective cover 2 that protects the gold contacts on the new microprocessor 1 . 9. Hold the new microprocessor and align the notches on it with the tabs in the microprocessor socket, or align the small triangle on one corner with the corresponding beveled corner of the microprocessor socket. 10. Lower the new microprocessor straight down into the microprocessor socket on the system board. 11. Close the microprocessor retainer and lock it into position with the small handle to secure the new microprocessor in the socket. 12. Reinstall the heat sink and fan assembly. See "Replacing the heat sink and fan assembly" on page 97. 13. Reinstall any other parts or reconnect any other cables you removed. 14. Go to "Completing the FRU replacement" on page 107. Chapter 8. Replacing FRUs (Type 7848) 101

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
8.
Remove
the
protective
cover
±2²
that
protects
the
gold
contacts
on
the
new
microprocessor
±1²
.
9.
Hold
the
new
microprocessor
and
align
the
notches
on
it
with
the
tabs
in
the
microprocessor
socket,
or
align
the
small
triangle
on
one
corner
with
the
corresponding
beveled
corner
of
the
microprocessor
socket.
10.
Lower
the
new
microprocessor
straight
down
into
the
microprocessor
socket
on
the
system
board.
11.
Close
the
microprocessor
retainer
and
lock
it
into
position
with
the
small
handle
to
secure
the
new
microprocessor
in
the
socket.
12.
Reinstall
the
heat
sink
and
fan
assembly.
See
“Replacing
the
heat
sink
and
fan
assembly”
on
page
97.
13.
Reinstall
any
other
parts
or
reconnect
any
other
cables
you
removed.
14.
Go
to
“Completing
the
FRU
replacement”
on
page
107.
Chapter
8.
Replacing
FRUs
(Type
7848)
101