Lenovo E200 Hardware Maintenance Manual (HMM) - 3000 E200 (type 7848) - Page 52
Other, Features, Multitasking, Destructive, versus, non-destructive, testing
View all Lenovo E200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
v Seek Tests: - checks the physical operation of the drive head. - Linear Seek - Random Seek - Min-Max Seek - Butterfly Seek v Verify Tests: - checks the integrity of the data present on the media. - Linear Verify - Random Verify v Surface Scan Tests: - checks the drive media for defects. - Surface Scan (Linear) - Surface Scan (Aggressive) - this is disabled for normal customer use. - Surface Scan (Random) v Self-monitoring, Analysis and Reporting Technology (SMART) - checks the SMART functionality for drives that support SMART. - Start SMART Self-Test Other Test Features: v Write-Splice Repair - detects and corrects Error Correction Code errors during Verify tests. v Auto Spin Down - a gradual spin down of the drive platters to avoid damaging the media. v Manufacturer Log - an in-depth manufacturer supported log of errors on the drive. Multitasking: To allow simultaneous testing of multiple hard drives whenever possible, the FDAT module is written as a set of multitasking functions. Each drive under test can run the same test or run a different test at the same time. Each subtest is written to handle a single test pass and all test variables are kept track of in a structure unique for each drive. However, when testing IDE drives, FDAT will not perform simultaneous testing of IDE drives that are attached to the same IDE cable. For example, if FDAT is testing four IDE drives on a PC, it will perform simultaneous testing on drives 1 and 3 first (master drives), then perform tests on 2 and 4 (slave drives). FDAT will also perform simultaneous testing on a master and slave that are on separate IDE cables, but will not perform simultaneous tests on a master and slave on the same IDE cable. This generally increases the amount of time needed to test multiple IDE drives. Another limitation of FDAT'S multitasking capability is the use of Ultra DMA (UDMA). Only one drive at a time can access the UDMA channel and the UDMA channel buffer must be kept high in order to maintain a speed advantage over other data transfer modes. In order to use the UDMA channel during testing, users must disable the multitasking feature. Destructive versus non-destructive testing: Most of the tests found in FDAT are non-destructive. This means that PC-Doctor program will preserve any data that is present on the tested media prior to beginning any destructive operations (such as write operations). However, users 46 Lenovo E200 Hardware Maintenance Manual