Lenovo ThinkPad 560 TP 560Z On-line User's Guide that was provided with the sy - Page 77
Using the Configuration Utility, The Configuration utility CONFIG.EXE modifies the CARDID.INI
View all Lenovo ThinkPad 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Vendor revision number Number of slots Number of functions per slot Vendor copyright information CARDINFO /OFF[:S,F] Turns off power to all PC Card slots. Note: S is the parameter that specifies the slot. You can turn off the power to only the specified slot with this parameter. F is the parameter that specifies the function. You can turn off the power to only the specified function with this parameter. CARDINFO /ON[:S,F] Turns on power to all PC Card slots. Note: S is the parameter that specifies the slot. You can turn on power to only the specified slot with this parameter. F is the parameter that specifies the function. You can turn on power to only the specified function with this parameter. CARDINFO /? Displays information about CARDINFO switches. Using the Configuration Utility The Configuration utility (CONFIG.EXE) modifies the CARDID.INI and CSALLOC.INI files. You need to run this utility if you are having difficulty using the PC Card, or if you are customizing your system. Whenever you finish using this utility, restart your system so that your changes take effect. The Configuration utility can be used for the following purposes: Setting or changing the IRQs and COM port assignment order for your fax/modem cards. Setting or changing the I/O port address, IRQ, and memory areas that your network cards will use. Selecting the address (primary, secondary, or any) that your ATA cards will be using to communicate with the system. Chapter 5. Using Your Computer with a PC Card 71