Lexmark C752 Setup Guide - Page 31
Removing the system board access cover, Use the illustration on
View all Lexmark C752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Removing the system board access cover 1 Locate the access cover on the back of the printer. 2 Remove the four access cover screws (two at top, two at bottom). 3 Remove the access cover. 4 Use the illustration on Page 23 to locate the connector for the card you want to install. Install memory, firmware, or option cards 22
22
Install memory, firmware, or option cards
Removing the system board access
cover
1
Locate the access cover on the
back of the printer.
2
Remove the four access cover
screws (two at top, two at bottom).
3
Remove the access cover.
4
Use the illustration on Page 23 to
locate the connector for the card
you want to install.