Lexmark C752 Setup Guide - Page 33

Installing a memory card, Warning, What do I do now?

Get Lexmark C752 PDF manuals and user guides View all Lexmark C752 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Installing a memory card Note: Some memory options offered for other Lexmark printers cannot be used with your printer. Refer to the publications CD for memory specifications. Warning: Memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card. Latch Notch Connection points Follow the instructions in this section to install a printer memory card. Memory cards must have 168-pin connectors. 1 Remove the system board access cover (see Page 22). 2 Unpack the memory card. Avoid touching the connection points along the edge of the card. Save the packaging. 3 Push open the latches on both ends of the memory connector. 4 Align the notches on the bottom of the card with the notches on the connector. 5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card. 6 Make sure each latch fits over the notch on the end of the card. What do I do now? Task Installing a firmware card Installing a hard disk Installing an option card Replacing the system board access cover Go to page... 25 26 28 30 Install memory, firmware, or option cards 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
24
Install memory, firmware, or option cards
Installing a memory card
Follow the instructions in this section to
install a printer memory card. Memory
cards must have 168-pin connectors.
Note:
Some memory options offered for other Lexmark
printers cannot be used with your printer. Refer to the
publications CD for memory specifications.
1
Remove the system board access
cover (see Page 22).
Warning:
Memory cards are easily damaged by static
electricity. Touch something metal on the printer before
you touch a card.
2
Unpack the memory card.
Avoid touching the connection
points along the edge of the card.
Save the packaging.
3
Push open the latches on both
ends of the memory connector.
4
Align the notches on the bottom of
the card with the notches on the
connector.
5
Push the memory card firmly into
the connector until the latches on
either end of the connector
snap
into place.
It may require some force to fully
seat the card.
6
Make sure each latch fits over the
notch on the end of the card.
Latch
Notch
Connection points
What do I do now?
Task
Go to page…
Installing a firmware card
25
Installing a hard disk
26
Installing an option card
28
Replacing the system board access cover
30