Lexmark C752 Setup Guide - Page 51
Attaching a networkcable, Ethernet
View all Lexmark C752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Attaching a network cable Ethernet You can attach your printer to a network using standard network cables. A 10BaseT/100BaseTx Fast Ethernet port is standard on the network model. To attach the printer to a network: 1 Make sure the printer is turned off and unplugged. 2 Connect the printer to a LAN drop or hub using standard cabling that is compatible with your network. The printer automatically adjusts for the network speed. Use Category 5 cable with an RJ-45 connector for the standard network port. 3 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a properly grounded outlet. If you installed an optional 2000-sheet drawer, plug the printer power jumper cord into the back of the drawer, and then plug the drawer's cord into a properly grounded outlet. Attach cables and power cord 42