Lexmark C752 Setup Guide - Page 70
Mac OS 8.6 to 9.x, Step 1: Install a custom PPD file, Step 2: Create a desktop printer
View all Lexmark C752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Mac OS 8.6 to 9.x Note: Installing the custom PPD is required only if this is the first time the printer has been set up. If the printer was previously installed, go on to "Step 2: Create a desktop printer" on page 61. Step 1: Install a custom PPD file 1 Insert the drivers CD into your CD-ROM drive. 2 Double-click Classic. 3 Double-click the Lexmark Installer icon. 4 Select the language of your operating system, and then click OK. 5 Click Install to install the PPD file for your printer. Step 2: Create a desktop printer 1 In the Chooser, select the LaserWriter 8 driver. 2 If you have a routed network, select the default zone from the list. If you don't know which zone to select, look on the Network Setup page under AppleTalk for Zone. 3 Select the new printer from the list. 4 If you don't know which printer to select, look on the Network Setup page under the AppleTalk heading to find the default name of the printer. 5 Click Create. 6 Make sure there is an icon next to the printer name in the Chooser. 7 Close the Chooser window. 8 Verify printer installation. a Click the desktop printer icon you just created. b Choose Printing Change Setup. • If the PPD file displayed in the PostScript Printer Description (PPD) file portion of the menu is correct for your printer, printer setup is complete. • If the PPD file displayed in the PostScript Printer Description (PPD) file portion of the menu is not correct for your printer, repeat "Step 1: Install a custom PPD file" on page 62. 61