Lexmark C752 Setup Guide - Page 35
Installing a hard disk
View all Lexmark C752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installing a hard disk Warning: Hard disks are easily damaged by static electricity. Touch something metal on the printer before you touch a disk. Hard disk Ribbon cable Mounting plate Follow the instructions in this section to install an optional hard disk. You need a small Phillips screwdriver to attach the hard disk to the mounting plate. If an option card has been installed, you may need to remove it before installing the hard disk. 1 Remove the system board access cover (see Page 22). 2 Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package. 3 Align the ribbon cable connector with the connector pins on the hard disk. 4 Attach the ribbon cable to the hard disk. 5 Align the screw holes on the mounting plate with the holes in the hard disk. 6 Secure the mounting plate to the hard disk with the screws. Install memory, firmware, or option cards 26