Lexmark Forms Printer 2581 User Guide - Page 83

Index 83 optional Tractor 2 Feeder positions paper incorrectly 70 paper fed from Auto Sheet Feeder is skewed 71 paper fed in Auto Sheet Feeder jams at printer entrance 69 paper jammed in Auto Sheet Feeder 69 printer does not feed from Auto Sheet Feeder 70 printer does not feed paper 69 paper feed, troubleshooting Auto Sheet Feeder feeds at incorrect rate 70 paper paths pull tractor 24 push tractor 24 paper sizes supported by the printer 42 paper types supported by the printer 42 pitch locking 21 selecting 21 pitch lock disabling 21 print quality troubleshooting characters are wrong or missing 73 dots are missing or print quality is poor 72 graphics do not print 73 incorrect line length 67 incorrect line spacing or overprinting occurs 74 incorrect number of lines on a page 73 lines do not start at left margin 67 print is too light 72 printer goes to Tear Off position before job finishes 66 smudged forms or print too dark 73 specified font or pitch is not printing or is changing 68 print troubleshooting buttons do not work 67 incorrect characters print, left margin changes, or printing stops 68 left margin moves right during printing 67 Print test works, but printer does not print when attached to the computer 65 printer alarm sounds 66 printer is noisy 66 printer power switch is on, but the power light is off 67 printer sounds like it is printing, but does not print 66 printer speed slows 67 printing continues beyond edges of continuous forms 68 printer cleaning 56 features and functions 9 overview 7 parts 7 test 61 printer status checking 62 printer test page interrupting or stopping 61 running 61 printing demonstration page 11 from DOS 13 from Windows 13 network setup page 13 pull position tractor 43 pull tractor converting 45 paper paths 24 push position tractor 43 push tractor converting 44 paper paths 24 R recycling Lexmark products 57 WEEE statement 78 ribbon cartridge removing 56 S safety information 6 security supporting IPSec 59 supporting SNMPv3 59 using 802.1x authentication 60 setting Top‑Of‑Form 39, 40, 41 Setup mode Control options 52 Data options 51 Emulation options 54 Forms Macro options 50 Interface options 54 Main menu options 49 using 47 SNMPv3 59 supplies ordering 56 T Tear Off function using 24 Tear Off position setting 24 Top‑Of‑Form setting 39, 40, 41 tractor pull position 43 push position 43 Tractor mode selecting 20 troubleshooting checking an unresponsive printer 61 contacting Customer Support 74 restoring factory default settings 58 troubleshooting, jams and misfeeds paper is jammed in the printer 68 troubleshooting, paper feed Auto Sheet Feeder feeds at incorrect rate 70 Auto Sheet Feeder feeds multiple sheets 71 Auto Sheet Feeder positions paper incorrectly 71 incorrect Top‑Of‑Form position 70, 71 jam in Tractor 2 Feeder 69 optional Tractor 2 Feeder does not feed 70 optional Tractor 2 Feeder positions paper incorrectly 70 paper fed from Auto Sheet Feeder is skewed 71