Lexmark W820 User's Guide - Page 104

26 Ordering supplies and maintenance items Note: In the U.S. or Canada, call 1-800-438-2468 for information about Lexmark Authorized Supplies Dealers in your area. In other countries, contact the place where you bought your printer. You can also visit the Lexmark online store at www.lexmark.com to order supplies. Ordering a maintenance kit 80 Scheduled Maintenance appears on the display after 300,000 letter-size pages have printed to let you know it is time to replace the items in the maintenance kit: fuser, transfer roller, and pick rollers. Replace these items at this time to maintain top performance, optimize print quality, and avoid printing problems. Order the appropriate maintenance kit: Part number Type of maintenance kit 12G4182 300K low-voltage maintenance kit 12G4183 300K high-voltage maintenance kit Check the tag at the rear of the printer to determine the voltage of your printer. If 120 V is on the tag, order a low-voltage maintenance kit. For 220 V, order a high-voltage maintenance kit. (See Replacing the items in the maintenance kit for more information.) Ordering a print cartridge When the 88 Toner Low message appears, you should order a new print cartridge. You can continue to print after the 88 Toner Low message appears for a few hundred pages until the print fades or no longer prints satisfactorily. If Toner Alarm is set to Single or Continuous, press Go to continue printing. Order part number 12B0090. Its average yield is 30,000 letter-size pages at 5% coverage. (See Replacing the print cartridge for more information.) Ordering a staple cartridge Have a supply of staple cartridges on hand before the Staples Low message appears because once it does the stapler can only staple 40 more times. Use part number 12L0252 to order a box of three staple cartridges. (See Replacing a staple cartridge for more information.) 102