Lexmark W820 User's Guide - Page 128
Replacing pick rollers, Removing old pick rollers
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
34 Replacing pick rollers The pick rollers come in a package of 15 in the maintenance kit. Replace three in each tray when the printer issues the 80 Scheduled Maintenance message. If you don't have a high capacity feeder, you will have nine pick rollers left over from the package. A pick roller transports the paper from an input tray to the paper path. Removing old pick rollers 1 Remove trays 1 and 2 from the printer, and trays 3 and 4 from the optional high capacity input feeder if it is installed. See the following topics to complete this step: • Behind trays 1, 2, and 3 • Behind Tray 4 2 Set all trays aside. 3 Open tray 5 completely. Note: The following illustrations show the process of removing old pick rollers; however, the illustrations do not show all the trays removed. Focus on the removal of the pick rollers. Ignore the trays still in the illustrations. 4 Start with the opening left by removing tray 1 and locate three pick rollers in the upper left corner inside the printer. 5 Turn the bottom pick roller counterclockwise until you see the small tab on the end. 126