Lexmark W820 User's Guide - Page 182
Disabling Size Sensing, Enabling auto size sensing
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
54 Disabling Size Sensing An administrator may choose to disable auto size sensing on trays. Auto size sensing allows for the linking of trays. (For more information, see Linking trays.) The values for the Size Sensing menu item are: Tray x size (where x represents trays 1 through 5), Auto, and Off. Two other menu items, Executive/B5 and Legal/B4, are for special media sizes. See Sensing special print media sizes for more information. To disable auto size sensing: 1 Turn the printer off. 2 Press and hold the Select and Return buttons, and then turn the printer on. 3 Release the buttons when Performing Self Test appears on the display. When the printer self test completes, Config Menu appears. 4 Press Menu until you see Size Sensing, and then press Select. Note: Only paper trays that support auto size sensing are displayed on the operator panel. 5 Press Menu until you see Tray x Sensing, where x represents the tray number of the tray you select to disable size sensing on, and then press Select. Repeat this for the other trays you want to disable size sensing for, if necessary. 6 Press Menu until you see Off, and then press Select. Saved briefly appears. Config Menu appears again with Size Sensing on the second line. 7 Press Return. 8 Press Menu until you see Exit Config Menu, and then press Select. Activating Menu Changes briefly appears, followed by Performing Self Test. The printer returns to the Ready message. Enabling auto size sensing To enable auto size sensing, repeat the steps in Disabling Size Sensing. However, in step 6 on page 180, select Auto instead of Off. 180