Lexmark Z1300 User's Guide - Page 21
Warning, Notes, Load up to, Make sure
UPC - 734646022743
View all Lexmark Z1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Load up to 10 envelopes 25 sheets of labels 10 transparencies Make sure • The stamp location is in the upper left corner. • The print side of the envelopes faces you. • The envelopes are designed for use with inkjet printers. • The envelopes are loaded against the right side of the paper support. • The paper guide rests against the left edge of the envelopes. Warning: Do not use envelopes that have metal clasps, string ties, or metal folding bars. Notes: - Do not load envelopes with holes, perforations, cutouts, or deep embossing. - Do not use envelopes that have exposed flap adhesive. • You follow the loading instructions that came with the labels. • The print side of the labels faces you. • The adhesive on the labels does not extend to within 1 mm of the edge of the label. • You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam. • The labels are loaded against the right side of the paper support. • The paper guide rests against the left edge of the labels. • The rough side of the transparencies faces you. • You don't use transparencies with paper backing sheets. • The transparencies are loaded against the right side of the paper support. • The paper guide rests against the left edge of the transparencies. Note: Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging. 21