LiftMaster SL595 SL595 Manual - Page 7

Safety Precautions For Open Roller Gates, Do Not Mount Accessories That Are, Accessible Through Gate - slide gate operators

Page 7 highlights

SAFETY PRECAUTIONS FOR OPEN ROLLER GATES WARNING Gate Edge on Rear of Gate for Open Direction Gate Edge on Fence Post for Open Direction Gate Edge on WARNING Leading Edge of Gate for Close Direction • Injuries occur when people get their hands or feet caught CAUTION between the top or bottom of the gate and the gate roller. These potential pinch-points should be guarded against at ALL times. Enclosed style gate tracks are available for refitting of these rollers from many fence suppliers. Also, Photo Beam for Open UNIT Direction Additional Post Mounted Gate Edge for Close Direction WARNING Photo Beam for Close Direction Additional Post Mounted Gate Edge for Open Direction roller guards are available for installing over the rollers. • UL325 requires that, when used, contact sensors shall be Pinch-Point Hazard located at the leading edge, trailing edge, and be post mounted both inside and outside of a vehicular horizontal slide gate. Non-contact sensors such as photo eyes MUST Always Test Gate Edges and Photo Beams Anytime They Are AVERTISSEMENT protect during both open and close gate cycles. • Injuries occur when people put their hands and arms Adjusted or Serviced through openings in the grill while the gate is operating. They cannot retract their arm and it gets caught between the AVERTISSEMENT moving gate grill and the stationary fence post or fence. This potential hazard can be averted by placing a 4' (1.2 m) screen mesh on the gate to prevent access through Pinch-Point Hazard openings anywhere the gate may travel. See Safety Brochure Gate Edge for Open Direction Gate Edge for Close Direction for details. ATTENTION Gate Edge Vertical Post Placed on • To prevent entrapment injuries, mount controls at least Both Sides of the Exposed 6' (1.8 m) from the gate or ANY moving parts of the gate. Rollers Can Prevent Hands From Reaching These Pinch-Points AVERTISSEMENT Gate Edge for Close Direction DO NOT MOUNT ACCESSORIES THAT ARE ACCESSIBLE THROUGH GATE! WARNING SIGN PLACEMENT ADVERTENCIA WARNING PRECAUCIÓN To prevent SERIOUS INJURY or DEATH from a moving gate: CAUTION • Install Warning signs on EACH side of gate in PLAIN VIEW. • Permanently secure each Warning sign in a suitable manner using fastening holes. NOT FOR USE AS PEDESTRIAN PASSAGE! This operator is intended for vehicular use only. To prevent INJURY to pedestrians, a separate pedestrian access should be supplied, visible from the gate. Locate the pedestrian access where there is not a chance of INJURY at any point during full movement of the gate. AVERTISSEMENT AVERTISSEMENT 7 ATTENTION ADVERTENCIA WARNING ADVERTENCIA WARNING Moving Gate Can Cause Injury or Death KEEP CLEAR! Gate may move at any time without prior warning. Do not let children operate the gate or play in the gate area. This entrance is for vehicles onl.y Pedestrians must use separate entrance

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

7
NOT FOR USE AS PEDESTRIAN PASSAGE! This operator is
intended for vehicular use only. To prevent INJURY to
pedestrians, a separate pedestrian access should be supplied,
visible from the gate. Locate the pedestrian access where there
is not a chance of INJURY at any point during full movement of
the gate.
DO NOT MOUNT ACCESSORIES THAT ARE
ACCESSIBLE THROUGH GATE!
WARNING SIGN PLACEMENT
Moving Gate Can Cause
Injury or Death
KEEP CLEAR!
Gate may move at any
time without prior warning.
Do not let children operate the gate or
play in the gate area.
This entrance is for vehicles only
.
Pedestrians must use separate entrance
SAFETY PRECAUTIONS FOR OPEN ROLLER GATES
To prevent SERIOUS INJURY or DEATH from a moving gate:
• Install Warning signs on EACH side of gate in PLAIN VIEW.
Permanently secure each Warning sign in a suitable manner
using fastening holes.
Injuries occur when people get their hands or feet caught
between the top or bottom of the gate and the gate roller.
These potential pinch-points should be guarded against at
ALL times. Enclosed style gate tracks are available for
refitting of these rollers from many fence suppliers. Also,
roller guards are available for installing over the rollers.
UL325 requires that, when used, contact sensors shall be
located at the leading edge, trailing edge, and be post
mounted both inside and outside of a vehicular horizontal
slide gate. Non-contact sensors such as photo eyes MUST
protect during both open and close gate cycles.
Injuries occur when people put their hands and arms
through openings in the grill while the gate is operating.
They cannot retract their arm and it gets caught between the
moving gate grill and the stationary fence post or fence. This
potential hazard can be averted by placing a 4' (1.2 m)
screen mesh on the gate to prevent access through
openings anywhere the gate may travel. See Safety Brochure
for details.
To prevent entrapment injuries, mount controls at least
6' (1.8 m) from the gate or ANY moving parts of the gate.
WARNING
WARNING
WARNING
WARNING
Gate Edge on
Rear of Gate for
Open Direction
Gate Edge on Fence
Post for Open Direction
Gate Edge on
Leading Edge of Gate
for Close Direction
Photo Beam
for Open
Direction
Photo Beam for
Close Direction
UNIT
Additional Post Mounted Gate
Edge for Close Direction
Additional Post Mounted Gate
Edge for Open Direction
Pinch-Point
Hazard
Pinch-Point
Hazard
Gate Edge for
Close Direction
Gate Edge for
Close Direction
Gate Edge for
Open Direction
Always Test Gate Edges and
Photo Beams Anytime They Are
Adjusted or Serviced
Gate Edge
Vertical Post Placed on
Both Sides of the Exposed
Rollers Can Prevent Hands
From Reaching These
Pinch-Points