Maytag MER5555QAQ Use and Care Guide - Page 23

Prgblem

Page 23 highlights

PRGBLEM Moisture collects on oven window or steam comes from oven vent. SOLUTmON , This is normal when cooking foods high in moisture. , Excessive moisture was used when cleaning the window. There is a strong odor or light smoke when oven is turned on. , This is normal for a new range and will disappear after a few uses. Initiating a clean cycle will "burn off" the odors more quickly. ° Turning on a ventilation fan will help remove the smoke and/or odor. ° Excessive food soils on the oven bottom. Use a self-clean cycle. Fault Codes ° BAKE or LOCK may flash rapidly in the display to alert you if there is an error or a problem. If BAKE or LOCK appear in the display, press Cancel pad. If BAKE or LOCK continue to flash, disconnect power to the appliance. Wait a few minutes, and then reconnect power. If the flashing still continues, disconnect power to the appliance and call an authorized servicer. ° If the oven is heavily soiled, excessive fiareups may result in a fault code during cleaning. Press the Cancel pad and allow the oven to cool completely, wipe out excess soil, then reset the clean cycle. If the fault code reappears, contact an authorized servicer. Noises may be heard. ° The oven makes several low level noises. You may hear the oven relays as they go on and off. This is normal. ° As the oven heats and cools, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage your appliance. There are no beeps and no display. ° Control may be in Sabbath Mode. See page 11. "SAb" flashing and then displayed continuously, , Oven is in Sabbath Mode. To cancel, press and hold the Clock pad for five seconds. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

PRGBLEM
SOLUTmON
Moisture
collects
on oven
,
This is normal when cooking foods high in moisture.
window
or
steam
comes from
,
Excessive moisture was used when cleaning the window.
oven
vent.
There
is
a strong
odor or
light
,
This is normal for a new range and will disappear after a few uses. Initiating a clean
smoke
when
oven
is
turned
on.
cycle will "burn off" the odors more quickly.
°
Turning on a ventilation fan will help remove the smoke and/or odor.
°
Excessive food soils on the oven bottom.
Use a self-clean cycle.
Fault Codes
°
BAKE or LOCK may flash rapidly in the display to alert you if there is an error
or a problem.
If BAKE or LOCK appear in the display, press Cancel pad.
If BAKE or LOCK continue to flash, disconnect power to the appliance.
Wait a few minutes, and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized servicer.
°
If the oven is heavily soiled, excessive fiareups may result in a fault code during
cleaning. Press the Cancel pad and allow the oven to cool completely, wipe out excess
soil, then reset the clean cycle. If the fault code reappears, contact an authorized
servicer.
Noises
may be heard.
°
The oven makes several low level noises. You may hear the oven relays as they go on
and off. This is normal.
°
As the oven heats and cools, you may hear sounds of metal parts expanding and
contracting. This is normal and will not damage your appliance.
There
are no beeps and
°
Control may be in Sabbath Mode. See page 11.
no display.
"SAb"
flashing
and then
,
Oven is in Sabbath Mode. To cancel, press and hold the Clock pad for five
displayed
continuously,
seconds.
22