Miele H 6200 BM Product Manual - Page 88
Deactivate Demo mode see Settings, Contact Miele Technical Service.
View all Miele H 6200 BM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Frequently asked questions Problem Possible cause and solution An oven mode has been The system lock is On. selected and the time of Turn off the system lock (see "System lock "). day and the symbol still appear in the display. The oven does not heat up. Demo mode has been activated appears in the display. The oven can be operated but does not heat up. Deactivate Demo mode (see "Settings An oven mode has been There has been a power failure which has caused the selected but the oven is current cooking process to stop. not working. Turn the mode selector to the • position and turn the oven off. Start the cooking process again. will appear in the display with flashing under : The power supply was interrupted for longer than 200 hours. Reset the time of day (see "Before using for the first time"). appears unexpectedly in this display and the symbol flashes at the same time. The buzzer may also be sounding. The oven has been operating for an unusually long period of time, this has activated the "Safety cut-out feature". Turn the mode selector to •. The oven is now ready to use again immediately. appears in the display. A fault has occurred that you cannot resolve. Contact Miele Technical Service. If the door is opened while using Microwave (Solo) , the oven stops making a noise. This is not a fault. If Microwave (Solo) is being used, the cooling fan will turn off when the door is opened. A noise is heard after the cooking process is complete. The cooling fan has turned on. It will turn off automatically after a short time. 88