NEC PX-50VP1A 42PD2/50PD1 - Page 14

Remote Controller 16 17 4 6 7 8 9 10 11 12 14 POWER OFF POWER ON RGB 2 RGB 1 RGB 3 VIDEO POSITION / CONTR OL EXIT PROCEED RGB/VIDEO CONTRAST BRIGHT VIDEO COLOR TINT SHARPNESS VISUAL NORMAL RASTER NORMAL ID SELECT CLEAR 1 POWER ON/OFF button: Switches the power on/off. (If the POWER/STANDBY let is not glowing, then these controls will not work.) 2 Input selection buttons: 1 Select the input signal that will be displayed on the screen. VIDEO: Switches to the signal that is connected to the 2 VIDEO IN connector. RGB1: Switches to the signal that is connected to the RGB1 IN (mini D-sub 15-pin) connector. RGB2: Switches to the signal that is connected to the 3 RGB2 IN (BNC type: R, G, B, H/CS, V) connector. RGB3: Switches to the signal that is connected to the RGB3 IN connector. 5 RASTER CONTROL (Screen Adjustment) 3 POSITION/CONTROL buttons (vwᮤ ᮣ): Used for screen position adjustment and on-screen manager (OSM) mode adjustment settings. 4 POSITION/CONTROL buttons (ᮤ ᮣ): Enable item selection and adjustments/settings. ON SCREEN (Screen and Image Adjustment via Menu Control) 5 PROCEED button: Displays the main menu of screen and image 13 adjustments. 15 Press this button during the display of the main menu to go to the sub menu. 6 EXIT button: Exits the on-screen adjustments. Press this button during the display of the sub menu to return to the main menu. VISUAL CONTROL (Image Adjustment) 7 CONTRAST button: Adjusts the contrast of the RGB signal and the video signal. 8 BRIGHT button: Adjusts the brightness of the RGB signal and the video signal. 9 COLOR button: Adjusts the saturation of the video signal colors. 10 TINT button: Adjusts the tint of the video signal. (Does not function in the PAL or SECAM settings.) 14