NEC PX-50VP1A 42PD2/50PD1 - Page 16
Using the wired remote control mode, Operating Range
View all NEC PX-50VP1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Operating Range * Use the remote controller within a distance of about 7 m / 23ft. from the front of the monitor's remote control sensor and at a horizontal angle of within 30°. * The remote control operation may not function if the monitor's remote control sensor is exposed to direct sunlight or strong artificial light, or if there is an obstacle between the sensor and the remote control unit. Approx. 7m/23ft 30˚ 30˚ POWER OFF POWER ON RGB 2 RGB 1 RGB 3 VIDEO POSITION / CONTR OL EXIT PROCEED RGB/VIDEO CONTRAST BRIGHT VIDEO COLOR TINT SHARPNESS VISUAL NORMAL RASTER NORMAL ID SELECT CLEAR Using the wired remote control mode Connect the included remote control cable to the remote control's remote jack and "REMOTE IN" jack on the monitor. When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control mode is used, the remote control unit can be operated even if no batteries are loaded. Note: When you connect a remote control cable to this monitor , attach the supplied ferrite core. If you do not do this, this monitor will not conform to mandatory FCC standards. (42PD2 only) Note: Do not connect the wired remote control to the REMOTE THROUGH OUT jack. If doing so, the remote control does not work. 16 Remote Control Cable To Remote Jack POWER OFF POWER ON RGB 2 RGB 1 RGB 3 VIDEO POSITION / CONTR OL EXIT PROCEED RGB/VIDEO CONTRAST BRIGHT VIDEO COLOR TINT SHARPNESS VISUAL NORMAL RASTER NORMAL ID SELECT CLEAR