Netgear FSM726S FSM726S User Manual - Page 29
Administration Console Access
UPC - 606449023091
View all Netgear FSM726S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
CHAPTER 6: ADMINISTRATION CONSOLE ACCESS The administration console is an internal, character-oriented, VT-100/ANSI menu-driven user interface for performing management activities. Using this method, you can view the administration console from a terminal, PC, Apple Macintosh, or UNIX workstation connected to the switch's console port. Figure 6-1 shows an example of this management method. Figure 6-1. Administration Console Management Method Direct Access Direct access to the switch console is achieved by connecting the switch's console port to a VT-100 or compatible terminal or to a PC, Apple Macintosh, or UNIX workstation equipped with a terminal-emulation program. This connection is made using the null-modem cable supplied with the switch. The following list provides examples of terminal-emulation programs: HyperTerminal (which is built into the Microsoft Windows operating systems) ZTerm (Apple Macintosh) TIP (UNIX workstation) The terminal-emulation program should use the following settings: Baud rate: 9,600 bps Data bits: 8 Parity: none Stop bit: 1 Flow control: none The direct access management method is required when you configure the switch for the first time. Thereafter, we recommend you use the Web management access method (described in chapter 7) to manage the switch. The console, using VT100 terminal emulation, can be accessed from the RS-232 serial port or a telnet connection. The switch offers password protection for this interface. All of the following examples of the Console's User Interface show a screen capture from a telnet session. Page 29 of 110