Netgear FSM726S FSM726S User Manual - Page 40
of 110 - factory default
UPC - 606449023091
View all Netgear FSM726S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Main Menu> Tools> Save Configuration After making any changes to the screens within the console interface, users must save the changed settings to NVRAM. Save Configuration to NVRAM Select Save Configuration and then use either 'Enter' or 'Y' to save the configuration to NVRAM. Restore Factory Values Select Restore Factory Values to reset the switch parameters to their original default settings. In order for changes to take effect, you must Reset the switch. Note: network IP settings (i.e. IP address, Gateway Address, Network Mask) will not be affected by this command. Figure 6-10: Restore Factory Values Page 40 of 110
Page 40 of 110
Main Menu> Tools> Save Configuration
After making any changes to the screens within the console interface, users must save the changed settings to NVRAM.
Save Configuration to NVRAM
Select Save Configuration and then use either ‘Enter’ or ‘Y’ to save the configuration to NVRAM.
Restore Factory Values
Select Restore Factory Values to reset the switch parameters to their original default settings. In order for changes to take effect, you must Reset
the switch.
Note
: network IP settings (i.e. IP address, Gateway Address, Network Mask) will not be affected by this command.
Figure 6-10: Restore Factory Values