Netgear RN526X Software Manual - Page 90

ReadyNAS OS 6.7 3. Click the Properties button to the right of the LUN group. 4. Configure the settings as explained in the following table: Item Description Name The name is provided for information only and cannot be changed. Target The target is the address that an iSCSI client (that is, an initiator) needs to access the LUN group. The Target field is automatically populated, but you can delete the content and then replace the content with a custom target address. Require initiators Select this check box to enable CHAP authentication and to allow only authenticated initiators to identify access to the LUN group. By default, access to the LUN group is open to the initiators that you themselves using add to list of initiators (see Add an iSCSI Initiator on page 91). CHAP Allowed Initiators Select one of the following radio buttons: • Any. Access to the LUN group is granted to all initiators with information about the target address. (If CHAP authentication is enabled, access depends on CHAP authentication.) • Selected. Access to the LUN group is granted to iSCSI qualified names (IQNs) only. (If CHAP authentication is enabled, access depends on CHAP authentication.) For more information about configuring iSCSI initiators, see the following sections: • Add an iSCSI Initiator on page 91 • Remove an iSCSI Initiator on page 93 • Edit the CHAP Password on page 94 LUNs 90