Netgear WAX620 User Manual - Page 163
Use an SFTP server to update the access point, Boot up Backup Firmware
View all Netgear WAX620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Insight Cloud Managed WiFi 6 AX3600 Access Point Model WAX620 The Dashboard page displays. 4. Select Management > Maintenance > Upgrade > Firmware Upgrade. The Firmware Upgrade page displays. The page shows both the current firmware version and the backup firmware version. 5. Click the Boot up Backup Firmware button. A warning pop-up window displays. CAUTION: When you revert to the backup firmware, the configuration of the access point is reset (cleared) with the exception of the IP address, access point name, and password for the local browser UI. The access point restarts and broadcasts SSID Netgearxxxxxx, in which xxxxxx represents the last six hexadecimal digits of the access point's MAC address. The MAC address is listed on the product label. The default WiFi passphrase is sharedsecret. 6. Click the Swap button. The pop-up window closes, the firmware reversion process initiates, and the access point restarts. WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reversion. For example, do not close the browser, click a link, or load a new page. Do not turn off the access point. Wait until the access point finishes restarting and the Power/Cloud LED remains solid green or solid blue. 7. Verify that the access point runs the backup firmware version by logging back in to the access point. The firmware version is displayed on the Dashboard page. Use an SFTP server to update the access point If someone (usually the network administrator) places new firmware on a secure FTP (SFTP) server in the network, you can load the firmware from the SFTP server and update the firmware of the access point. To update the firmware of the access point from an SFTP server: 1. Launch a web browser from a computer that is connected to the same network as the access point or directly to the access point through an Ethernet cable or WiFi connection. 2. Enter the IP address that is assigned to the access point. A login window displays. Manage and Maintain the Access 163 Point User Manual