Netgear WAX620 User Manual - Page 175
Manage the Energy Efficiency Mode
View all Netgear WAX620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Insight Cloud Managed WiFi 6 AX3600 Access Point Model WAX620 To enable or disable the LEDs: 1. Launch a web browser from a computer that is connected to the same network as the access point or directly to the access point through an Ethernet cable or WiFi connection. 2. Enter the IP address that is assigned to the access point. A login window displays. If your browser displays a security warning, you can proceed, or add an exception for the security warning. For more information, see What to do if you get a browser security warning on page 43. 3. Enter the access point user name and password. The user name is admin. The password is the one that you specified. The user name and password are case-sensitive. If you previously added the access point to a NETGEAR Insight network location and managed the access point through the Insight Cloud Portal or Insight app, enter the Insight network password for that location. For more information, see Connect over WiFi using the NETGEAR Insight app on page 25. The Dashboard page displays. 4. Select Management > Configuration > System > Advanced > LED Control. The LED Control page displays. 5. Select or clear one of the following radio buttons: • Enable All LEDs: All LEDs are enabled. This is the default setting. • Disable All LEDs: All LEDs are disabled. • Enable Power/Cloud LED: All LEDs are disabled except for the Power/Cloud LED. 6. Click the Apply button. Your settings are saved. Manage the Energy Efficiency Mode If no WiFi clients are connected to the access point, the access point can automatically enter Energy Efficiency Mode (EEM) to reduce power consumption and save energy. When one or more WiFi clients connect, the access point automatically leaves the EEM to resume normal operation. Manage and Maintain the Access 175 Point User Manual