Netgear WAX620 User Manual - Page 179
Display the access point Internet, IP, and system settings
View all Netgear WAX620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Insight Cloud Managed WiFi 6 AX3600 Access Point Model WAX620 Display the access point Internet, IP, and system settings To display the access point, Internet, IP, and system settings: 1. Launch a web browser from a computer that is connected to the same network as the access point or directly to the access point through an Ethernet cable or WiFi connection. 2. Enter the IP address that is assigned to the access point. A login window displays. If your browser displays a security warning, you can proceed, or add an exception for the security warning. For more information, see What to do if you get a browser security warning on page 43. 3. Enter the access point user name and password. The user name is admin. The password is the one that you specified. The user name and password are case-sensitive. If you previously added the access point to a NETGEAR Insight network location and managed the access point through the Insight Cloud Portal or Insight app, enter the Insight network password for that location. For more information, see Connect over WiFi using the NETGEAR Insight app on page 25. The Dashboard page displays. 4. Locate the Connection Status Information pane, System Information pane, and IP Settings Information pane, which are shown, respectively, on the left, upper center, and lower center of the following Dashboard figure. If the page width on your device is narrow, these panes might be located elsewhere on the Dashboard. Monitor the Access Point and the 179 Network User Manual