Netgear WN802Tv1 WN802T User Manual - Page 26

Country/Region, Turn Radio On, Wireless Network Name SSID, Wireless Mode, If Enabled

Get Netgear WN802Tv1 - Wireless-N Access Point PDF manuals and user guides View all Netgear WN802Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

RangeMax NEXT Wireless-N Access Point WN802T Reference Manual . Figure 2-4 2. From the Country/Region pull-down menu, select the region where the WN802T can be used (the Country/Region is not Configurable in the United States; but is configurable in the rest of the world). Note: If your country or region is not listed, please check with your local government agency. 3. Configure the Wireless LAN settings based on the following field descriptions: • Turn Radio On. On by default, you can also turn off the radio to disable access through this device. This can be helpful for configuration, network tuning, or troubleshooting activities. • Wireless Network Name (SSID). Enter a 32-character (maximum) service set ID in this field; the characters are case sensitive. When the wireless access point is deployed in "infrastructure" mode, the SSID assigned to a wireless device must match the wireless access point SSID in order for the wireless device to communicate with the WN802T. If they do not match, you will not get a wireless connection to the WN802T. The default is NETGEAR. • Broadcast Wireless Network Name (SSID). If Enabled, the Wireless Access Point broadcasts its SSID allowing Wireless Stations which have a "null" (blank) SSID to adopt the correct SSID. If set to disable, the SSID is not broadcast. The default is Enabled. • Wireless Mode. From the pull-down menu, select the desired wireless operating mode: - 11b/g - Both 802.11b and 802.11g wireless stations can be used. 2-8 Installation and Configuration v1.0, August 2007

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
2-8
Installation and Configuration
v1.0, August 2007
.
2.
From the
Country/Region
pull-down menu, select the region where the WN802T can be used
(the Country/Region is not Configurable in the United States; but is configurable in the rest of
the world).
3.
Configure the Wireless LAN settings based on the following field descriptions:
•
Turn Radio On
. On by default, you can also turn off the radio to disable access through
this device. This can be helpful for configuration, network tuning, or troubleshooting
activities.
•
Wireless Network Name (SSID)
. Enter a 32-character (maximum) service set ID in this
field; the characters are case sensitive. When the wireless access point is deployed in
“infrastructure” mode, the SSID assigned to a wireless device must match the wireless
access point SSID in order for the wireless device to communicate with the WN802T. If
they do not match, you will not get a wireless connection to the WN802T. The default is
NETGEAR.
•
Broadcast Wireless Network Name (SSID).
If Enabled, the Wireless Access Point
broadcasts its SSID allowing Wireless Stations which have a “null” (blank) SSID to adopt
the correct SSID. If set to disable, the SSID is not broadcast. The default is Enabled.
•
Wireless Mode
. From the pull-down menu, select the desired wireless operating mode:
–
11
b/g – Both 802.11b and 802.11g wireless stations can be used.
Figure 2-4
Note:
If your country or region is not listed, please check with your local government
agency.