Netgear WN802Tv1 WN802T User Manual - Page 67
Appendix A Default Settings and Technical Specifications, Factory Default Settings
View all Netgear WN802Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Appendix A Default Settings and Technical Specifications This appendix provides the factory default settings and technical specifications for the RangeMax NEXT Wireless-N Access Point. Factory Default Settings You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset. • To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the Power LED changes from blinking green to solid amber). Your device will return to the factory configuration settings shown in Table A-1 below. • Pressing the reset button for a shorter period of time will simply cause your device to reboot. Table A-1. Access Point Default Configuration Settings Feature AP Login User Login URL User Name (case sensitive) Login Password (case sensitive) Ethernet Connection Access Point Name Ethernet MAC Address Access Point Mode Port Speed Local Network (LAN) Description 192.168.0.233 or netgearxxxxxx"; where xxxxxx is the last 6 hexadecimal digits of the WN802T MAC address. admin password netgearxxxxxx where xxxxxx are the last 6 digits of the wireless access point MAC address. See rear label. On 10/100/1000 Mbps Default Settings and Technical Specifications A-1 v1.0, August 2007