Netgear WN802Tv1 WN802T User Manual - Page 30
Logging in to the RangeMax NEXT, Open a Web browser such as Mozilla Firefox
View all Netgear WN802Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Logging in to the RangeMax NEXT The WN802T is set, by default with the IP address of 192.168.0.233 with DHCP disabled. Note: If logging in using the default IP address, the computer you are using to connect to the WN802T should be configured with an IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0. If DHCP is enabled, there are two methods you can use to connect to the WN802T after the DHCP server on your network assigns it a new IP address. • If your wireless access point is to be deployed on a local network, you can enter the NetBIOS1 name into your Web browser. The default wireless access point name is netgearxxxxxx, where xxxxxx represents the last 6 bytes of the MAC address. The MAC address is printed on the rear label of the WN802T. (Using the NetBIOS naming convention to access your router across several network segments is known to be unreliable.) • Reserve an IP address (based on the WN802T's MAC address) on the DHCP server. That way, if your router is deployed across several segments, you can configure the wireless access point with a static IP address which you can always use to log in to make future configuration changes. To log in using the default IP Address: 1. Open a Web browser such as Mozilla Firefox, Internet Explorer or Netscape Navigator. 2. Connect to the WN802T by entering the default address of http://192.168.0.233 into your browser. hhttttpp://19922..116688.0.0.2.32333 Figure 2-6 1. NetBIOS name login is not supported in the initial release of the firmware. Check the Release Notes of your firmware version for NetBIOS support at http://kbserver.netgear.com/products/WN802T.asp. 2-12 v1.0, August 2007 Installation and Configuration