Netgear WN802Tv1 WN802T User Manual - Page 36
SSID and WEP/WPA Settings Setup Form, WPA-PSK, WPA2-PSK or WPA-PSK + WPA2-PSK.
View all Netgear WN802Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual SSID and WEP/WPA Settings Setup Form For a new wireless network, print or copy this form and fill in the configuration parameters. For an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Be sure to set the Regulatory Domain correctly as the first step. • SSID: The Service Set Identification (SSID) identifies the wireless local area network. NETGEAR is the default WN802T SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the line below Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter card. All wireless nodes in the same network must be configured with the same SSID, • Circle the type of Security Authentication used in your wireless network, and then fill out the appropriate required encryption parameters: WEP, WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSK • WEP Encryption Type: Circle one: Automatic or Open System Note: If you selected Open System, the other devices in the network will not connect unless they are set to Open System, and have the same keys in the same positions as those in the WN802T. • WEP Encryption Keys: Circle one: 64 or 128 bits. (Enter all four keys for the Key Size chosen.) Key 1 Key 2 Key 3 Key 4 WPA Security Encryption for WPA-PSK, WPA2-PSK or WPA-PSK + WPA2-PSK. Record a Passphrase between 8 and 63 characters: Passphrase Use the procedures described in the following sections to configure the WN802T. Store this information in a safe place. . 3-4 Wireless Security Settings v1.0, August 2007