Nokia E62 User Guide - Page 9
Insert and remove a memory card, Switch on your device, See Memory - phone
View all Nokia E62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Get started 5. Insert the locking catches of the back cover into the corresponding slots (1). Press down on the bottom corners of the cover, and slide the cover in the direction of the arrow (2). Insert and remove a memory card If you have a memory card, follow the instructions to insert it. See "Memory," p. 18. 1. If necessary, remove the device's back cover. 2. Slide the memory card (1) into the memory card slot (2). Ensure that the beveled corner of the memory card is pointing towards the top of the device and the contact area is facing down. 3. Replace the battery cover. 4. To remove the memory card, remove the battery cover and push the memory card into the device to activate the release mechanism. Then, gently pull the card out of your device. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. Switch on your device 1. To switch the device on, press the power key. 2. If the device asks for a PIN code, lock code, or security code, enter the code, and select OK. 3. To switch the device off, press the power key. Tip: When you switch the device on, it may recognize the SIM card provider and configure the correct text message, multimedia message, and GPRS settings automatically. If not, contact your service provider for the correct settings, or use the Sett. wizard application. The device can be used without the network-dependent phone functions when a SIM card is not inserted or when the Offline profile is selected. Copyright © 2006 Nokia. All Rights Reserved. 9