Oki MICROLINE 390 TURBO Printer Handbook - Page 100

Epson Function Commands (ASCII, Decimal, Hexadecimal) Notes Stop Enhanced Printing ASCII: ESC H Dec: 27 72 Hex: 1B 48 Clears double strike printing set by ESC G command. Double Width (Expanded) Printing ASCII: ESC W n Dec: 27 87 n Hex: 1B 57 n n= 1: Start double width printing n= 0: Stop double width printing Immediate Double Width ASCII: SO or ESC SO Dec: 14 or 27 14 Hex: 0E or 1B oE Prints double width only to end of line: can also be canceled by DC4, ESC W 0 and ESC ! commands. Stop Immediate Double Width Printing ASCII: DC4 Dec: 20 Hex: 14 Only cancels double width set by SO or ESC SO. Double Height Printing ASCII: ESC w n or ESC US n Dec: 27 119 n or 27 31 n Hex: 1B 77 n or 1B 1F n OKI unique command n= 1: Start double height n= 0: Stop double height Graphics, 8 & 24-pin Mode For all graphics commands the number of dot columns of graphic data is as follows: dots= n1 + (n2 x 256) Graphics Select/ Print ASCII: ESC * m n1 n2[graphic data] Dec: 27 42 m n1 n2[graphic data] Hex: 1B 2A m n1 n2[graphic data] Selects 8-pin and 24-pin graphic modes and prints graphic data. m= 0: Single density, 8-pin 60 dpi m= 1: Double density, 8-pin, 120 dpi m= 2: Double speed, double density, 8-pin, quasi-120 dpi (dots can not be printed directly adjacent to one another) m= 3: Quadruple density, 8-pin, quasi240 dpi (dots can not be printed directly adjacent to one another) m= 4: CRT I, 8-pin, 80 dpi m= 6: CRT II, 8-pin, 90 dpi m= 32: Single density, 24-pin, 60 dpi m= 33: Double density, 24-pin, 120 dpi m= 38: CRT III, 24-pin, 90 dpi m= 39: Triple density, 24-pin, 180 dpi m= 40: Hex-density, 24-pin, quasi-360 dpi (dots can not be printed directly adjacent to one another) ML390/391 Turbo Printer Handbook 93