Oki MICROLINE 390 TURBO Printer Handbook - Page 30
Switching Paper Paths
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Switching Paper Paths To switch from continuous-form feed from the rear or bottom (optional push or pull tractor installed) of the printer to single-sheet feed from the top: 1. Tear off printed pages. 2. Press PARK button. 3. Swing wire guide up into paper separator, then pivot separator to upright posi- tion. 4. Move paper lever to position marked "TOP". 5. Load single sheet paper into paper separator. To switch from top feed to continuous-form tear or bottom (optional push or pull tractor installed) feed: 1. Make sure no sheet is in paper path (press FF/LOAD to remove single sheet from path). 2. Lower paper separator to continuous forms position and swing wire guide over onto pull-up roller assembly. 3. Move paper lever to position marked "REAR" or "BOT", as appropriate. 4. Press FF/LOAD button. Continuous-form paper will advance into print position. ML390/391 Turbo Printer Handbook 23