Oki MICROLINE 390 TURBO Printer Handbook - Page 120
Cancels Print Suppress Mode. Printer
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
IBM Function Commands (ASCII, Decimal, Hexadecimal) Notes Print Suppress Mode On ASCII: ESC Q n Dec: 27 81 n Hex: 1B 16 n Print Suppress Mode Off ASCII: DC1 Dec: 17 Hex: 11 Stop Printing ASCII: ESC j Dec: 27 106 Hex: 1B 6A Disable Paper-Out Sensor ASCII: ESC 8 Dec: 27 56 Hex: 1B 38 Enable Paper-Out Sensor ASCII: ESC 9 Dec: 27 57 Hex: 1B 39 Software I-Prime ASCII: ESC } NUL Dec: 27 125 0 Hex: 1B 7D 00 Set/ Reset Incremental Print Mode ASCII: ESC i n Dec: 27 105 n Hex: 1B 69 n Prints out data in print buffer and puts printer in Print Suppress Mode until DC1 command is received, I-PRIME signal is received, or SEL button is pushed. Command will be ignored unless Print Suppress Effective item in MENU is set to "YES." n=36: Model ML390 Turbo (narrow carriage) n=35: Model ML391 Turbo (wide carriage) Cancels Print Suppress Mode. Printer becomes active, processes all data received. Deselects the printer. Press SELECT to reactivate. No data is lost. Paper-out sensor is deactivated: printer will print to next top of form before registering paper end error. This command will be ignored if the Paper Out Override in MENU is set to No (the factory default). Sensor detects when less than 1/2 inch of paper is left. When PAPER OUT light is on, pressing SELECT prints 1 line of data at a time until top of form position on next page is reached. Sensor can also be controlled by the MENU. OKI unique command. Sets the printer to the same state as if it had been shut off and turned back on (print buffer cleared, receive buffer unaffected). Sets the Incremental print mode n=0: Reset Incremental print mode n=1: Set Incremental print mode ML390/391 Turbo Printer Handbook 113