Oki MICROLINE 390 TURBO Printer Handbook - Page 104
Raster Graphics
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Epson Function Commands (ASCII, Decimal, Hexadecimal) Notes Software I-Prime ASCII: ESC } NUL Dec: 27 125 0 Hex: 1B 7D 00 Set unit ASCII: ESC ( U n1 n2 m Dec: 27 40 85 n1 n2 m Hex: 1B 28 55 n1 n2 m Set/ Reset Incremental Print Mode Raster Graphics Select graphics mode ASCII: ESC i n Dec: 27 105 n Hex: 1B 69 n ASCII: ESC ( G n1 n2 m Dec: 27 40 71 n1 n2 m Hex: 1B 28 47 n1 n2 m n1=1, OKI unique command. Clears data in print buffer (receive buffer unaffected); resets printer to menu default if applicable, non-menu features returned to factory default. Executes paper eject in Cut Sheet Feeder mode. Sets the basic unit of horizontal and vertical lengths. n1=1, n2=0: specifies the number of parameters (in bytes) to follow The commands affected by this command are: ESC (V, ESC (v, ESC \, ESC $, ESC (C, ESC (c. Sets the Incremental print mode n=0: Reset Incremental print mode n=1: Set Incremental print mode Sets the raster graphics mode. n2=0: specifies the number of parameters (in bytes) to follow This command can be deactivated by ESC @ (printer initialization). The raster graphics command ESC is valid only while in this mode. The printer is initialized by this command. ML390/391 Turbo Printer Handbook 97