Oki MICROLINE 390 TURBO Printer Handbook - Page 70
Cleaning the Housing
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Cleaning the Housing You should clean the printer every six months (or after about 300 hours of operation). To do this: 1. Turn printer OFF and remove paper from path. Remove pull-up roller assembly 2. Open access cover and remove pull-up roller assembly. 3. Use clean, dry cloth to dust area around carriage shaft and platen. Be sure to remove any loose particles of paper. Note: The built-up of dust or paper powder in the printer, which may be occurred by some environmental settings or media used, may cause a mulfunction, so execute cleaning according to how the printer is dirty. 4. Reinstall pull-up roller assembly and close access cover. Note: When installing a pull-up roller assembly, Shift the paper lever in agreement with the "Rear" mark before the installation. Never use solvents or strong detergents on the cabinet-they could damage the housing. ML390/391 Turbo Printer Handbook 63