Oki MICROLINE 390 TURBO Printer Handbook - Page 108
Function, Commands, ASCII, Decimal, Hexadecimal, Notes
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
IBM Function Commands (ASCII, Decimal, Hexadecimal) Notes Vertical Control Set 1/8-inch Line Spacing Set 7/72-inch Line Spacing Activate Line Spacing Set n/72-inch or n/60-inch Line Spacing ASCII: ESC 0 Dec: 27 48 Hex: 1B 30 ASCII: ESC 1 Dec: 27 49 Hex: 1B 31 ASCII: ESC 2 Dec: 27 50 Hex: 1B 32 n ASCII: ESC A n Dec: 27 65 n Hex: 1B 41 n Set n/360-inch Line Spacing ASCII: ESC % 8 n Dec: 27 37 56 n Hex: 1B 25 38 n Set n/216-inch or n/180inch Line Spacing ASCII: ESC 3 n Dec: 27 51 n Hex: 1B 33 n Line Feed ASCII: LF Dec: 10 Hex: 0A Reverse Line Feed ASCII: ESC ] Dec: 27 93 Hex: 1B 5D 1/8 -inch Line Spacing=8 lines per inch. This is the line spacing used for graphics. This command is required to activate the line spacing set by the ESC A n command (see below). In PPR emulation, sets and stores n/72inch line spacing; in AGM emulation, sets and stores n/60-inch line spacing. The ESC 2 command must be sent to initiate the line spacing change. n=1 to 255 n=0: no change in line sapcing. OKI unique command. Sets line spacing to n/360-inch. n=1 to 255 n=0: no line feed For PPR emulation, sets n/216-inch line spacing; for AGM emulation, sets n/180=inch line spacing. n=1 to 255 n=0: command is ignored Prints buffer data and moves printhead down by current by current line spacing value. In PPR emulation, performs carriage return only if Auto CR in MENU has been changed to Yes (factory default is No). In AGM emulation performs carriage return regardless of Auto CR setting. Prints buffer data and performs one reverse line feed at the current line spacing. Movement will not go above top of form. Not recommended for use with optional pull tractor. ML390/391 Turbo Printer Handbook 101