Oki MICROLINE 390 TURBO Printer Handbook - Page 117
Graphics, 8-Pin Mode
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
IBM Function Commands (ASCII, Decimal, Hexadecimal) Notes Overscore ASCII: ESC _ n Dec: 27 95 n Hex: 1B 5F n Graphics, 8-Pin Mode For all 8-pin graphics commands the number of dot columns of graphic data=n1 + (n2 x 256) Single Density Graphics ASCII: ESC K l h [graphics data] Dec: 27 75 l h [graphics data] Hex: 1B 4B l h [graphics data] Double Density Graphics ASCII: ESC L l h [graphics data] Dec: 27 76 l h [graphics data] Hex: 1B 4C l h [graphics data] Quasi-Double Density Graphics Quadruple Density Graphics ASCII: ESC Y l h [graphics data] Dec: 27 89 l h [graphics data] Hex: 1B 59 l h [graphics data] ASCII: ESC Z l h [graphics data] Dec: 27 90 l h [graphics data] Hex: 1B 5A l h [graphics data] Set Aspect Ratio for Bit Image Graphics ASCII: ESC n n Dec: 27 110 n Hex: 1B 6E n Prints a continuous overscore over all text characters except for tab spaces. n=0 to 255 n=odd: start overscore n=even: stop overscore Dot density 60 dpi horizontal, 72 dpi vertical. Maximum data per line: ML390 Turbo=480: ML391 Turbo=816 l,h=0 to 255: specifies amount of subsequent Bit Image bytes received, calculated as l + (h x 256). Dot density 120 dpi horizontal, 72 dpi vertical. Maximum data per line: ML390 Turbo=960: ML391 Turbo=1632 l, h=0 to 255: specifies amount of subsequent Bit Image bytes received, calculated as l + (h x256). Same as low speed double density (120 dpi), but printer can't put two adjacent dots in the same row. Dot density 240 dpi horizontal, 72 dpi vertical. Printer can't put two adjacent dots in the same row. Maximum data per line: ML390 Turbo=1920: ML391 Turbo=3264 l,h=0 to 255: specifies amount of subsequent Bit Image bytes received, calculated as l + (h x 256). In PPR emulation, sets ratio of vertical to horizontal dot density in bit image graphics. Valid only for ESC K, ESC L, 110 Appendix D: Priner Commands