Oki MICROLINE 390 TURBO Printer Handbook - Page 118

IBM Function Graphics, 8 & 24-Pin Mode Graphics Select/ Print Graphics Select Commands (ASCII, Decimal, Hexadecimal) Notes ESC Y, and ESC Z commands. Ratio is determined by value of variable n: n=0 or 1: 5 horizontal/ 6 vertical n=2: 1 horizontal/ 1 vertical n=3: Command ignored Invalid (trapped) in IBM AGM emulation. ASCII: ESC * m l h [graphics data] Dec: 27 42 m l h [graphics data] Hex: 1B 2A m l h [graphics data] Selects 8-pin and 24-pin graphic modes and prints graphic data. Valid only for IBM AGM. m=0: Single density, 8-pin, 60 dpi m=1: Double density, 8-pin, 120 dpi m=2: Double speed, double density, 8-pin, quasi-120 dpi (dots can not be printed directly adjacent to one another) m=3: Quadruple density, 8-pin, quasi240 dpi (dots can not be printed directly adjacent to one another) m=4: CRT I, 8-pin, 80 dpi m=6: CRT II, 8-pin, 90 dpi m=32: Single density, 24-pin, 60 dpi m=33: Double density, 24-pin, 120 dpi m=38: CRT III, 24-pin, 90 dpi m=39: Triple density, 24-pin, 180 dpi m=40: Hex-density, 24-pin, quasi-360 dpi (dots can not be printed directly adjacent to one another). l, h=0 to 255: specifies amount of subsequent Bit Image bytes received, calculated as l + (h x 256) ASCII: ESC [ g l h m [graphics data] Dec: 27 91 103 l h m [graphics data] Hex: 1B 5B 67 l h m [graphics data] Selects graphics and prints m=0: Single density, 8-pin, 60 dpi [same as ESC * () ] m=1: Double density, 8-pin, 120 dpi [same as ESC * 1] m=2: Double speed, double density, 8-pin, quasi-120 dpi [same as ESC * 2] m=3: Quadruple density, 8-pin, quasi240 dpi [same as ESC * 3] m=8: Single density, 24-pin, 60 dpi [same as ESC * 32] ML390/391 Turbo Printer Handbook 111