Oki MICROLINE 390 TURBO Printer Handbook - Page 91
Appendix C: Priner Commands
![]() |
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Epson Function Commands (ASCII, Decimal, Hexadecimal) Notes Set n/60-inch Line Spacing Set n/180-inch Line Spacing Set n/360-inch Line Spacing ASCII: ESC A n Dec: 27 65 n Hex: 1B 41 n ASCII: ESC 3 n Dec: 27 51 n Hex: 1B 33 n ASCII: ESC + n or ESC [ n Dec: 27 43 n or 27 93 n Hex: 1B 2B n or 1B 5B n Sets line spacing of n/60-inch. n=0 to 255 n=0: no line feed. Sets a line spacing of n/180-inch. n=0 to 255 n=0: no line feed Sets line spacing of n/360-inch. ESC [ n is OKI unique command n=0 to 255 n=0: no line feed Line Feed n/180-inch Line Feed ASCII: LF Dec: 10 Hex: 0A ASCII: ESC J n Dec: 27 74 n Hex: 1B 4A n n/180-inch Reverse Line Feed ASCII: ESC j n Dec: 27 106 n Hex: 1B 6A n n/360-inch Line Feed ASCII: ESC ] n Dec: 27 93 n Hex: 1B 5D n Prints buffer data and moves the printhead by the current line spacing value. Cancels SO and ESC SO commands. Executes one n/180-inch line feed without changing line spacing. n=0 to 255 n=0: no line feed, but initiates printing Executes one n/180-inch reverse line feed without changing line spacing. n=0 to 255 n=0: no line feed, but initiates printing OKI unique command. Executes n/360inch line feed without changing line spacing. n=0 to 255 n=0: no line feed, but initiates printing Set relative vertical print position ASCII: ESC (v n1 n2 m1 m2 Dec: 27 40 118 n1 n2 m1 m2 Hex: 1B 28 76 n1 n2 m1 m2 Performs carriage return in the forward or reverse direction from the current position. n1=2, n2=0: specifies the number of parameters (inbytes) to follow Amount of carriage returns executed=±(m1 +[m2 x256]) x (basic unit in inches) The basic unit is set by set unit command ESC (U. The default of basic unit is 1/360 inch. Forward feeding exceeding approx. 46.2 inches and reverse feeding exceeding approx. 0.5 inch are invalid. Reverse feeding is invalid in raster graphics mode. 84 Appendix C: Priner Commands
![](/manual_guide/products/oki-data-microline-390-turbo-printer-handbook-1dbf843/91.png)