Oki MICROLINE 390 TURBO Printer Handbook - Page 51
Resetting Top of Form, Using Bar codes
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
To engage the Hexadecimal Dump Mode: 1. Be sure paper is loaded. 2. Turn off printer. 3. Hold SEL and FF/LOAD buttons for several seconds while turning on printer. The printer will print the line "Hex Data Dump" and be ready to receive data in the Hexadecimal Dump Mode. To run the test, simply send data to the printer while it is in the Hexadecimal Dump Mode. When you're done, you can exit the Hexadecimal Dump Mode by either pressing the SEL button or by turning the printer off, then on again. Resetting Top of Form To reset the Top of Form to the factory default: 1. Turn off printer. 2. Hold down QUIET and PARK buttons while turning printer back on. Using Bar codes Your MICROLINE 390/391 Turbo printer incorporates eight different bar codes: • UPC A • UPC E • EAN 8 • EAN 13 • Code 39 • Code 128 • Interleaved 2 of 5 • Postnet 44 Operation