Oki MICROLINE 390 TURBO Printer Handbook - Page 79

Group Bottom Feed Top Feed Set-Up Item Line Spacing Form Tear-Off Skip Over Perforation Page Width * Page Length Setting 6 LPI, 8 LPI Off, 500 ms, 1 sec, 2 sec No, Yes 13.6", 8" 11", 11 1/2", 12", 14", 17", 3", 3.5", 4", 5.5", 6", 7", 8", 8.5" Line Spacing Form Tear-Off *5 Bottom Margin Page Width * Page Length Wait Time Page Length Control 6 LPI, 8 LPI Off, 500ms, 1 sec, 2 sec Valid, Invalid 13.6", 8" 11", 11 1/2", 12", 14", 17", 3", 3.5", 4", 5.5", 6", 7", 8", 8.5" 1 sec, 2 sec, 500ms by Menu Setting, by Actual Page Length Graphics Receive Buffer Size Paper Out Override Print Registration Operator Panel Function Reset Inhibit Print Suppress Effective Auto LF Auto CR *1 CSF Bin Select SI Select Pitch (10 CPI) *1 SI Select Pitch (12 CPI) *1 Time Out Print Auto Select Graphics Speed Centering Position CSF Type * Uni-directional, bi-directional 1 Line, 32K, 64K, 79K No, Yes 0, 0.05 mm Left, 0.10 mm Left, 0.15 mm Left, 0.20 mm Left, 0.25 mm Left, 0.25 mm Right, 0.25 mm Right, 0.15 mm Right, 0.10 mm Right, 0.05 mm Right Full Operation, Limited Operation No, Yes Yes, No No, Yes No, Yes Bin 1, Bin 2 17.1 CPI, 15 CPI 20 CPI, 12 CPI Valid, Invalid No, Yes Low, High DEFAULT, MODE 1, MODE 2 Wide, Narrow 72 Appendix B: Menu Selections