Onkyo TX-NR626 Owner's Manual English - Page 12
Connections, Connecting the AV Receiver, Connecting Your Speakers - 7 2 channel receiver
View all Onkyo TX-NR626 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connections Connecting the AV Receiver Connecting Your Speakers B C D* + G EF () B C Front speakers D Center speaker E F Surround speakers G Subwoofer(s) ( ) Surround back speakers * + Front high speakers Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass. To get the best from your surround sound system, you need to set the speaker settings automatically (➔ page 24) or manually (➔ page 55). Number of speakers Front speakers Center speaker Surround speakers Surround back speaker*1 Surround back speakers*1 Front high speakers*1 2345677 Speaker Configuration 5.1-channel: B C D E F G 7.1-channel: B C D E F G + ( ) 7.1-channel: B C D E F G + * + *1 Front high and surround back speakers cannot be used at the same time. Using Powered Subwoofers Corner position Connections To find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various positions within the room, and choose the one that provides the most satisfying results. You can connect the powered subwoofer with two SUBWOOFER PRE OUT jacks respectively. The same signal is output from each jack. Tip • If your subwoofer is unpowered and you're using an external amplifier, connect the subwoofer pre out jack to an input on the amplifier. Attaching the Speaker Cable Labels The speaker terminals are color-coded for identification purpose. Speaker Front left, Front high left, Zone 2 left Front right, Front high right, Zone 2 right Center Surround left Surround right Surround back left Surround back right Color White Red Green Blue Gray Brown Tan The supplied speaker cable labels are also colorcoded and you should attach them to the positive (+) side of each speaker cable in accordance with the table above. Then all you need to do is to match the color of each label to the corresponding speaker terminal. 1/3 of wall position En-12