Onkyo TX-NR626 Owner's Manual English - Page 58
Source Setup, En-58 - zone 2 not working
![]() |
View all Onkyo TX-NR626 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Note • If the "Front High" settings is set to "None" (➔ page 56), this setting cannot be selected. • If the "Powered Zone 2" setting is set to "Yes" and Zone 2 is turned on, this setting cannot be selected. ■ Dolby EX ` Auto: If the source signal contains a Dolby EX flag, the Dolby EX listening mode is used. ` Manual: You can select any available listening mode. This setting determines how Dolby EX encoded signals are handled. This setting is unavailable if no surround back speakers are connected. This setting is effective with Dolby Digital, Dolby Digital Plus and Dolby TrueHD only. Note • If the "Surround Back" setting is set to "None" (➔ page 56), this setting cannot be selected. • If the "Powered Zone 2" setting is set to "Yes" and Zone 2 is turned on, this setting cannot be selected. • If the "Front High" setting is enabled (➔ page 56), this setting is fixed to "Manual". ■ TrueHD Loudness Management ` Off ` On This setting specifies whether or not to apply the Late Night processing on a Dolby TrueHD source. Note • When this setting is set to "Off", the Late Night function for Dolby TrueHD sources is automatically fixed to "Off". DTS ■ Neo:6 Music Center Image ` 0 to 2 to 5 The DTS Neo:6 Music listening mode creates 6channel surround sound from 2-channel stereo sources. With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center channel. Changing the value from "0" to "5" will spread the sound of the center channel to left and right (outwards). Theater-Dimensional ■ Listening Angle ` Wide: Select if the listening angle is greater than 30 degrees. ` Narrow: Select if the listening angle is less than 30 degrees. With this setting, you can optimize the TheaterDimensional listening mode by specifying the angle of the front left and right speakers relative to the listening position. Ideally, the front left and right speakers should be equidistant from the listening position and at an angle close to one of the two available settings. Front left speaker Front right speaker Listening angle: 30° Advanced Operations Note • For best results, we recommend setting "Narrow" to 20° and "Wide" to 40°. 4. Source Setup Items can be set individually for each input selector. Press the input selector buttons to select an input source. Audyssey® The tone for each speaker is set automatically by Audyssey MultEQ® Room Correction and Speaker Setup. To enable the following settings, you must first perform the Room Correction and Speaker Setup (➔ page 24). • These technologies cannot be used when a pair of headphones is connected. ■ Audyssey ` Off ` Movie: Select this setting for movie material. The Audyssey indicator will light. ` Music: Select this setting for music material. The Audyssey indicator will light. Note • When "Audyssey Quick Start" has been used for measurement, "Audyssey" cannot be selected. • Audyssey equalizing does not work with DSD sources. En-58 Operating procedure (➔ page 52)
![](/manual_guide/products/onkyo-txnr626-owners-manual-english-e1daed9/58.png)