Onkyo TX-NR626 Owner's Manual English - Page 46

Setting the Display Brightness You can adjust the brightness of the AV receiver's display. 1 Press RECEIVER once followed by DIMMER repeatedly to switch between: normal, dim, or dimmer brightness. Tip • (North American and Taiwanese models) Alternatively, you can use DIMMER on the AV receiver. Muting the AV Receiver You can temporarily mute the output of the AV receiver. 1 Press RECEIVER followed by MUTING. The output is muted and the MUTING indicator flashes on the AV receiver's display. Tip • To unmute, press MUTING again or adjust the volume. • Muting is automatically cancelled when the AV receiver is set to standby. Changing the Input Display When you connect an V-capable Onkyo component, you must configure the input display so that V can work properly. This setting can be done only from the front panel. 1 Press TV/CD or GAME. "TV/CD" or "GAME" appears on the AV receiver's display. 2 Press and hold down the same button (about 3 seconds) to change the input display. Repeat this step to select the desired input display. ■ TV/CD: → TV/CD → DOCK TAPE → ■ GAME: GAME ↔ DOCK " Note • "DOCK" can be selected for the "TV/CD" or "GAME" input selector, but not at the same time. • Enter the appropriate remote control code before using the remote controller for the first time (➔ page 72). En-46 Playback