Onkyo TX-NR626 Owner's Manual English - Page 92
Specifications, En-92 - wireless speakers
View all Onkyo TX-NR626 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Specifications Amplifier Section Rated Output Power All channels: 95 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC) 115 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC) (North American) 7 ch × 160 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC) (Others) Maximum Effective Output Power 7 ch × 175 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Asian) Dynamic Power* * IEC60268-Short-term maximum output power 240 W (3 Ω, Front) 210 W (4 Ω, Front) 120 W (8 Ω, Front) THD+N (Total Harmonic Distortion+Noise) 0.08% (20 Hz - 20 kHz, half power) Damping Factor 60 (Front, 1 kHz, 8 Ω) Input Sensitivity and Impedance (Unbalance) 200 mV/47 kΩ (LINE) 2.5 mV/47 kΩ (PHONO MM) Rated RCA Output Level and Impedance 200 mV/2.2 kΩ (LINE OUT) Maximum RCA Output Level and Impedance 2 V/2.2 kΩ (LINE OUT) Phono Overload 70 mV (MM 1 kHz 0.5% Direct) Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (Direct mode) Tone Control Characteristics ±10 dB, 30 Hz (BASS) ±10 dB, 20 kHz (TREBLE) Signal to Noise Ratio 106 dB (LINE, IHF-A) 80 dB (PHONO MM, IHF-A) Speaker Impedance 6 Ω - 16 Ω (North American and Taiwanese) 4 Ω - 16 Ω (Others) Video Section Input Sensitivity/Output Level and Impedance 1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite) Component Video Frequency Response 5 Hz - 100 MHz/+0 dB, -3 dB Tuner Section FM Tuning Frequency Range 87.5 MHz - 107.9 MHz (North American and Taiwanese) 87.5 MHz - 108.0 MHz, RDS (Others) AM Tuning Frequency Range 522/530 kHz - 1611/1710 kHz Preset Channel 40 Network Section Ethernet LAN 10BASE-T/100BASE-TX Wireless LAN Compatible standards: IEEE 802.11 b/g/n standard (Wi-Fi® standard) Security: WEP 64 bit, WEP 128 bit, WPA/WPA2PSK (AES), WPA/WPA2-PSK (TKIP) Transmission frequency 1 - 11 ch (North American and Taiwanese) 10 - 13 ch (France) 1 - 13 ch (Others) (Wi-Fi® standard) Radio frequency 2.4 GHz Bluetooth Section Appendix Communication system Bluetooth Specification version 2.1 + EDR (Enhanced Data Rate) Maximum communication range Line of sight approx. 15 m*1 Frequency band 2.4 GHz band (2.4000 GHz 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles A2DP 1.2 (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) Supported Codecs SBC Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) *1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. En-92