Onkyo TX-SR601 Owner Manual - Page 51
Original, lter CinemaFILTER loading for movies, TX-SR601/601E only
View all Onkyo TX-SR601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Listening Modes DSP: Changes the listening mode for the signal type that is currently being input from the selected input source as shown below. Orchestra → Unplugged → Studio-Mix → TV Logic → All Ch Stereo → Mono → T-D → Mono Movie → Enhance → Orchestra. If pressed, the corresponding settings in the "Input Setup" menu for the selected input source is also changed (see page 54). Original filter (CinemaFILTER) loading for movies (TX-SR601/601E only) The CinemaFILTER function gently decreases the level of the extreme high frequencies, compensating for overly-bright sounding motion picture soundtracks. Select this function if the sound from the front speakers is too bright. This function only works in the Dolby Digital, Dolby Digital EX, Dolby Pro Logic II Movie, DTS, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Neo:6 Cinema, All Ch Stereo, Mono listening modes. Press the CINE FLTR button on the remote controller. The current setting is displayed. Press the button again to change the setting. On: The CinemaFILTER function is used during playback. Off: The CinemaFILTER function is not used during playback. Note: Dolby Pro Logic II Movie, DTS Neo:6 Cinema, Dolby Digital, and DTS are only enabled for multichannel playback. 51