Onkyo TX-SR601 Owner Manual - Page 53

Input Setup b. Component Video The video signal from the input jacks set at the "b. Component Video" setting is output to the COMPONENT VIDEO OUT jacks. Use this setting if you connect monitors like TV to the COMPONENT VIDEO OUT jacks on the TX-SR701/701E/601/601E. For example, when you connect the DVD player to the COMPONENT VIDEO INPUT 1 jacks, select "DVD" as input source and set "b. Component Video" to "INPUT 1." The default settings are given below. Input source selected CD PHONO* TUNER TAPE DVD VIDEO1 VIDEO 2 VIDEO 3 VIDEO 4 Component video input Last Last Last Last INPUT 1 INPUT 2 INPUT 2 INPUT 2 INPUT 2 * TX-SR701/701E only INPUT 1: Selects when the video device is connected to the COMPONENT VIDEO INPUT 1 jacks. INPUT 2: Selects when the video device is connected to the COMPONENT VIDEO INPUT 2 jacks. Last: Select to have the video of the previous input source continued. c. IntelliVolume This setting allows you to adjust for the volume differences between your various input source components. When switching input sources, you may find that the output level for different components or input sources connected to the TXSR701/701E/601/601E is different even though the main volume setting is the same. Under normal circumstances, you would then have to change the volume setting each time you change the input source. This Intelli Volume setting allows you to preset a volume level for each input source separately so that when you do switch from one input source to another, the TX-SR701/701E/601/601E adjusts the volume accordingly and the volume stays the same. If the volume is quieter than that of other sources, increase it with the cursor button, and if it is louder than that of other sources, decrease it with the cursor button. The IntelliVolume can be adjusted between -12 and +12 decibels. 53